Axis Controller SU112-TOUCH
MultiAxis Controller with included PLC, up to 5 Axis , 48 digital in , 48 digital out, LCD color with touch screen feature and 40 keys membrane keyboard
SU112-TOUCH is the low cost Axis Controller with included PLC made by Arteco Motion Tech.
Minimum configuration: 2 interpolated axis with included sensors, 16 in, 16 out, 2 analog input and 1 serial port RS232/485. Thanks to the slots located in the back side of the multiaxis controller, SU112-TOUCH can be configurated depending on the user’s needs. There are 4 slots available. Each slot can receive the available expansions boards as the 8 digital input + 8 digital output, the 1 axis expansion, 2 axis expansion, the 8 digital input + 8 digital output + canbus port. So, the maximum configuration can reach 5 interpolated axis with included sensors, 32 in, 32 out, 2 analog input, 2 serial ports RS232/485, 1 CANbus port to connect the controller to other Axis and I/O expansion modules for distributed I/O and Axis. Each state of the I/O is shown by LEDs located near each terminal block.
SU112-TOUCH provides the color LCD 5,7″ display 320×240 pixels and a resistive touch screen. The display, the touch screen and the keyboard can be programmed using the implemented functions and instructions of the PLC. A rich set of graphics and text commands allows the user to make his HMI, 100% according to his needs.
SU112-TOUCH can be controlled using a rich set of Motion Control Functions: Simple positioning, Linear interpolation, Electronic cam, Boolean cam, Optimized trajectories generating starting from a points series, Rotative Axis, Control of Pick and Place machines, Circular interpolation, Self-learning and its execution. Other important features: remote programming like debug, service and upgrade using the low cost WEB interface, built in modbus RTU protocol for connecting the Axis controller to SCADA and other common HMIs.